PRODUCTS

FibroScan® 502

The first clinically validated device using Transient Elastography. To date 800 FibroScan® 502 devices have been installed worldwide. FibroScan® is used to diagnose 1.5 million men, women and children every year.

Sharing powerful pratice

-Quantitative & immediate results in kPa,
-A large volume of the liver explored (about 100 times larger than the biopsy),
-A large spectrum of applications (from the first diagnosis to the follow up of cirrhosis complications).

FibroScan® 502

As an adjunct to biopsy, FibroScan® 502 aids in decision making and enhances both patient and pratice management. Easy to operate, FibroScan®502 offers:

Automatic adjustment of parameters depending on the probe choice
An integrated software and hardware providing unique core technology
A large, bright color screen giving complete view of patient examination
User-friendly interface and patient database
Data transfer by USB Key
Printing solutions

Probes*

Three different ergonomic probes enable you to address a full range of clinical and morphological needs. Each patient is different.
Echosens has designed its probes to ensure efficient diagnosis in all circumstances.

S Probe: the probe for children
- Transducer specifically designed for being placed into narrow intercostal space
- A higher frequency, 5 MHz, enabling adapted measurements for chest perimeter from 45 to 75 cm
- Depth calculation is adapted from 15 to 50 mm for the smaller liver of children

M Probe: the standard probe
- The M probe is designed for the general population. It is used for adults with a thoracic perimeter of more than 75 cm
- Transducer frequency is 3.5 MHz
- Measurements of liver stiffness take place between 25 and 65 mm under the skin

XL Probe: diagnosis for overweight patients
- A more sensitive frequency of 2.5 MHz has been designed to enhance deeper signal penetration through tissues over a 35 to 75 mm depth
- A Skin Capsule Distance measurement (SCD) must be performed to select the XL probe* (SCD ≥ 2.5 cm)

*To enhance your productivity, the Echosens Service Centre or your local distributor will support you with calibration, repairs, parts and maintenance services. FibroScan® 502 probes need to be calibrated every six months to maintain performance.